DESCRIPTION
PRIME TILEFIX PREMIUM S-912 is a high polymer modified cement base tile adhesive for installing large format VITRIFIIED TILES & NATURAL STONES, in internal & external areas for both floor and wall.
RECOMENDED USES
PRIME TILEFIX PREMIUM S-912 is used for the permanent fixing of Large format tiles & stones.
ADVANTAGES
It has excellent water and impact resistance
Excellent adhesive strength
Good slip resistance
Minimum shrinkage
Highly polymer modified
Best workability
APPLICATION METHOD
PRIME TILEFIX PREMIUM S-912 should be applied after proper surface preparation. Apply using a flat trowel at a thickness of 3 mm and level it by notched trowel. The thickness of the ribs will depend upon the size of a title.do not spread more than 1 sq. meter at a time. Fix the tiles immediately with sliding motion to avoid poor bond. adjust the position of tile before the open time of mortar otherwise it will affect on bond strength. After the completion of fixing tiles remove the excess mortar by using a damp cloth before setting of material.
SPECIAL NOTES
Tiling in newly constructed building should not commence until all shrinkage movement and creeping has taken place. Always keep at least 2 mm of gap between two tiles. Direct sunlight, wind or rain should be avoided while application time. Grouting should be carried out for at least 48 hours after completion of tiling.
MIXING
PRIME TILEFIX PREMIUM S-912 is supplied in 20 kg bags. It should be mixed with a 4.5 – 5 liter of potable clean water. Use electric agitator to achieve uniform and homogeneous mix.
PACKING
It is available in 5 kg & 20 kg bags.
COLOUR
Grey
COVERAGE
Approx. 60-65 sq. ft per bag of 20 kg with square notch trowel of 3mm bedding. The coverage depends on the conditions of the substrate and the type of tiles.
CLEANING
Water is all that is needed to remove uncured mortars.
HEALTH AND SAFETY
Non hazardous. If ingested seek medical advice immediately.
